===== Using the Keypads on the TFT LCD =====

3 Keys on the shield will be mapped to "Up", "Down", "Enter" input event.

You need to install a wiringPi library to use the keypads on your ODROID-C1.

1. Get our wiringPi source code on your ODROID-C1.
<code>
git clone https://github.com/hardkernel/wiringPi.git
</code>

2. Build the source code.
<code>
cd wiringPi
sudo ./build
</code>

3. Compile tftlcd_key source code.
<code>
gcc -o tftlcd_key tftlcd_key.c -lwiringPi -lwiringPiDev -lpthread
</code>


4.Run it in background.
<code>
sudo ./tftlcd_key &
</code>


<file c tftlcd_key.c>
//------------------------------------------------------------------------------------------------------------
//
// ADS7846 TFT-LCD Board Keypad Application. (Use wiringPi Library)
// Defined port number is wiringPi port number.
//
// Compile : gcc -o <create excute file name> <source file name> -lwiringPi -lwiringPiDev -lpthread
// Run : sudo ./<created excute file name>
//
//------------------------------------------------------------------------------------------------------------
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>

#include <unistd.h>
#include <string.h>
#include <time.h>

#include <wiringPi.h>
#include <wiringPiI2C.h>
#include <wiringSerial.h>

#include <fcntl.h>
#include <linux/input.h>
#include <linux/uinput.h>

//------------------------------------------------------------------------------------------------------------
//
// Global handle Define
//
//------------------------------------------------------------------------------------------------------------
#define KEY_PRESS   1
#define KEY_RELEASE 0

#define HIGH        1
#define LOW         0

#define UPDATE_PERIOD   200 // 200ms

//------------------------------------------------------------------------------------------------------------
//
// UINPUT Handle:
//
//------------------------------------------------------------------------------------------------------------
int uInputFd = -1;

#define UINPUT_DEV_NODE "/dev/uinput"

//------------------------------------------------------------------------------------------------------------
//
// Keypad Define:
//
//------------------------------------------------------------------------------------------------------------
#define PORT_KEY1   1   // GPIOY.BIT7(#87)
#define PORT_KEY2   4   // GPIOX.BIT7(#014)
#define PORT_KEY3   5   // GPIOX.BIT5(#102)

struct  {
    unsigned char   port;       // GPIO Number
    unsigned char   def_status; // default release status (port HIGH or LOW)
    char            code;       // Keycode
    int             status;     // current status
}   UserKey[] = {
    {   PORT_KEY1, HIGH, KEY_UP, KEY_RELEASE },
    {   PORT_KEY2, HIGH, KEY_DOWN, KEY_RELEASE },
    {   PORT_KEY3, HIGH, KEY_ENTER, KEY_RELEASE },
};

#define MAX_KEY_CNT     sizeof(UserKey)/sizeof(UserKey[0])

//------------------------------------------------------------------------------------------------------------
//------------------------------------------------------------------------------------------------------------
//
// Keypad Event Send Function:
//
//------------------------------------------------------------------------------------------------------------
static int send_key_event (int fd, unsigned int type, unsigned int code, unsigned int value)
{
    struct  input_event event;
    
    memset(&event, 0, sizeof(event));
    
    event.type  = type;
    event.code  = code;
    event.value = value;
    
    if(write(fd, &event, sizeof(event)) != sizeof(event))    {
        fprintf(stderr, "%s : event send error!!\n", __func__);
        return  -1;
    }
    
    return 0;
}

//------------------------------------------------------------------------------------------------------------
//
// Keypad Update Function:
//
//------------------------------------------------------------------------------------------------------------
static void key_update (void)
{
    int i;
    
    for(i = 0; i < MAX_KEY_CNT; i++)    {
        if(digitalRead(UserKey[i].port) != UserKey[i].status)   {

            UserKey[i].status = digitalRead(UserKey[i].port);
            send_key_event( uInputFd, 
                            EV_KEY,
                            UserKey[i].code,
                            UserKey[i].status != UserKey[i].def_status ? KEY_PRESS : KEY_RELEASE );
            send_key_event( uInputFd, 
                            EV_SYN,
                            SYN_REPORT,
                            0 );
        }
    }
}

//------------------------------------------------------------------------------------------------------------
//
// system init
//
//------------------------------------------------------------------------------------------------------------
int system_init(void)
{
    int i;
    struct uinput_user_dev  device;

    memset(&device, 0, sizeof(device));

    if((uInputFd = open(UINPUT_DEV_NODE, O_WRONLY)) < 0)    {
        fprintf(stderr, "%s : %s Open error!\n", __func__, UINPUT_DEV_NODE);
        return  -1;
    }

    // uinput device init
    strcpy(device.name, "keypad");
    device.id.bustype   = BUS_HOST;
    device.id.vendor    = 0x16B4;
    device.id.product   = 0x0701;
    device.id.version   = 0x0001;
    
    if(write(uInputFd, &device, sizeof(device)) != sizeof(device))   {
        fprintf(stderr, "%s : device init error!\n", __func__);
        goto    err_out;
    }

    if(ioctl(uInputFd, UI_SET_EVBIT, EV_KEY) < 0)   {
        fprintf(stderr, "%s : evbit set error!\n", __func__);
        goto    err_out;
    }
    
    // Keypad port init
    for(i = 0; i < MAX_KEY_CNT; i++)    {
        pinMode (UserKey[i].port, INPUT);
        pullUpDnControl (UserKey[i].port, PUD_UP);
        
        if(ioctl(uInputFd, UI_SET_KEYBIT, UserKey[i].code) < 0) {
            fprintf(stderr, "%s : keybit set error!\n", __func__);
            goto    err_out;
        }
    }

    if(ioctl(uInputFd, UI_DEV_CREATE) < 0)  {
        fprintf(stderr, "%s : dev create error!\n", __func__);
        goto    err_out;
    }

    return  0;

err_out:
    close(uInputFd);    uInputFd = -1;    

    return  -1;
 }

//------------------------------------------------------------------------------------------------------------
//
// Start Program
//
//------------------------------------------------------------------------------------------------------------
int main (int argc, char *argv[])
{
    static int timer = 0 ;

    wiringPiSetup ();

    if (system_init() < 0)
    {
        fprintf (stderr, "%s: System Init failed\n", __func__);     return -1;
    }

    for(;;)    {
        usleep(100000);
        if (millis () < timer)  continue ;

        timer = millis () + UPDATE_PERIOD;

        // All Data update
        key_update();
    }

    if(uInputFd)    close(uInputFd);

    return 0 ;
}

//------------------------------------------------------------------------------------------------------------
//------------------------------------------------------------------------------------------------------------

</file>