===== ODROID-SHOW Tutorial on ubuntu =====
First download the ODROID-SHOW source code with github.\\
Then add libraries after install the arduino IDE.\\
Finally after **connecting jumper**, compile and upload.

==== Download the ODROID-SHOW source code ====
<code>
> sudo apt-get install git
> cd ~/work
> git clone https://github.com/hardkernel/ODROID-SHOW
</code>
==== Install the arduino IDE ====
Launch Ubuntu Software Center, search for "arduino", and install it

{{:en:software_center.png?500|}}

==== Run arduino IDE ====
Open "show_main.ino" sketch file in this path.\\
ODROID-SHOW/show_main/show_main.ino

==== Setting Preferences ====
You need to locate sketchbook path to the ODROID-SHOW.

{{:en:preferences.png?500|}}
==== Add Libraries ====
Execute show_main source code with arduino IDE.\\
You can add the libraries in the IDE through the menu skech -> import Library... -> Add Library...

{{:en:add_library.png?500|}}

The following way, add ODROID-SHOW folder. (sketchbook folder)

{{:en:add_library2.png?500|}}

==== Compile and Upload ====
Check the serial port between /dev/ttyUSBn and "tools -> Serial Port" of arduino IDE.
<code>
> ls /dev/ttyUSB*
</code>
{{:en:check_serialport.png?500|}}

Finally after connecting the jumper, click "upload" button of arduino IDE after click Verify button or "Ctrl + R".