ODROIDC2-UBOOT-CONFIG

setenv dtbaddr 0x1000000
setenv loadaddr 0x20000000

# Resolution Configuration
# 'hdmimode' must be one of below to configure display resolution within
# supported by your TV or monitor.
#    Symbol             | Resolution
# ----------------------+-------------
#    "480p60hz"         | 720x480 Progressive 60Hz
#    .....
#    "3440x1440p60hz"   | 3440x1440 Progressive 60Hz
setenv hdmimode "custombuilt"

# modeline for 1792x1344p60Hz                     
setenv modeline "1792,1344,204800,83660,60,1792,1920,2120,2448,1344,1345,1348,1394,0,1,1"
setenv customwidth "1792"                          
setenv customheight "1344"                          

setenv rootopt "root=/dev/mmcblk0p2 rw init=/init rootwait"
setenv consoleopt "console=ttyS0,115200"
setenv androidopt "androidboot.hardware=odroidc2 androidboot.serialno=${fbt_id#}"
setenv logoopt "osd1,loaded,${fb_addr},${hdmimode}"
setenv selinuxopt "androidboot.selinux=disabled"

# HDMI/DVI Mode Configuration
# This will enforce the signal type of display
# "hdmi" - For HDMI interface
# "dvi" - For DVI interface
setenv vout_mode "hdmi"

# HPD enable/disable option
setenv disablehpd "false"

# Overscan offset configuration
# All offsets are zero and can be tuned by manual or ODROID Utility
setenv overscan_top "0"
setenv overscan_left "0"
setenv overscan_bottom "0"
setenv overscan_right "0"
suspend_hdmiphy=0
led_blink=1
                                                 
setenv bootargs "${rootopt} ${consoleopt} modeline=${modeline} hdmimode=${hdmimode} hdmitx=${cecconfig} vout=${vout_mode} disablehpd=${disablehpd} logo=${logoopt} ${androidopt} ${selinuxopt} suspend_hdmiphy=${suspend_hdmiphy} led_blink=${led_blink}"
                                                    
save                                               
                                                   
showlogo ${hdmimode}                                
#usb pwren                                          
                                                    
movi read dtb 0 ${dtbaddr}                          
movi read boot 0 ${loadaddr}                        
booti ${loadaddr} - ${dtbaddr}