We're no longer updating This wiki!!

Linux (v4.2 - experimental)

This page introduce how you can download and compile the Linux kernel for ODROID-XU4, especially for mainline kernel. You need to use the gcc version 4.9 to build the Linux Kernel.

Toolchain (4.9.2)

Click one of the site to download toolchain to build Linux kernel.

Once the download is done, extract the tarball to /opt/toolchains/.

$ sudo mkdir -p /opt/toolchains
$ sudo tar xvf gcc-linaro-arm-linux-gnueabihf-4.9-2014.09_linux.tar.xz -C /opt/toolchains/

In order to add the toolchain path to PATH, paste below lines to $HOME/.bashrc.

export ARCH=arm
export CROSS_COMPILE=arm-linux-gnueabihf-
export PATH=/opt/toolchains/gcc-linaro-arm-linux-gnueabihf-4.9-2014.09_linux/bin/:$PATH

You can check if the toolchain installed above works properly while checking the version of toolchain. If you can find gcc version 4.9.2 20140904 (prerelease) at the end of the line, the toolchain is well installed.

$ arm-linux-gnueabihf-gcc -v
Using built-in specs.
COLLECT_GCC=/opt/toolchains/gcc-linaro-arm-linux-gnueabihf-4.9-2014.09_linux/bin/arm-linux-gnueabihf-gcc
COLLECT_LTO_WRAPPER=/opt/toolchains/gcc-linaro-arm-linux-gnueabihf-4.9-2014.09_linux/bin/../libexec/gcc/arm-linux-gnueabihf/4.9.2/lto-wrapper
Target: arm-linux-gnueabihf
Configured with: /cbuild/slaves/oorts/crosstool-ng/builds/arm-linux-gnueabihf-linux/.build/src/gcc-linaro-4.9-2014.09/configure --build=i686-build_pc-linux-gnu --host=i686-build_pc-linux-gnu --target=arm-linux-gnueabihf --prefix=/cbuild/slaves/oorts/crosstool-ng/builds/arm-linux-gnueabihf-linux/install --with-sysroot=/cbuild/slaves/oorts/crosstool-ng/builds/arm-linux-gnueabihf-linux/install/arm-linux-gnueabihf/libc --enable-languages=c,c++,fortran --disable-multilib --enable-multiarch --with-arch=armv7-a --with-tune=cortex-a9 --with-fpu=vfpv3-d16 --with-float=hard --with-pkgversion='crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09' --with-bugurl=https://bugs.launchpad.net/gcc-linaro --enable-__cxa_atexit --enable-libmudflap --enable-libgomp --enable-libssp --with-gmp=/cbuild/slaves/oorts/crosstool-ng/builds/arm-linux-gnueabihf-linux/.build/arm-linux-gnueabihf/build/static --with-mpfr=/cbuild/slaves/oorts/crosstool-ng/builds/arm-linux-gnueabihf-linux/.build/arm-linux-gnueabihf/build/static --with-mpc=/cbuild/slaves/oorts/crosstool-ng/builds/arm-linux-gnueabihf-linux/.build/arm-linux-gnueabihf/build/static --with-isl=/cbuild/slaves/oorts/crosstool-ng/builds/arm-linux-gnueabihf-linux/.build/arm-linux-gnueabihf/build/static --with-cloog=/cbuild/slaves/oorts/crosstool-ng/builds/arm-linux-gnueabihf-linux/.build/arm-linux-gnueabihf/build/static --with-libelf=/cbuild/slaves/oorts/crosstool-ng/builds/arm-linux-gnueabihf-linux/.build/arm-linux-gnueabihf/build/static --enable-threads=posix --disable-libstdcxx-pch --enable-linker-build-id --enable-plugin --enable-gold --with-local-prefix=/cbuild/slaves/oorts/crosstool-ng/builds/arm-linux-gnueabihf-linux/install/arm-linux-gnueabihf/libc --enable-c99 --enable-long-long --with-mode=thumb --disable-multilib --with-float=hard
Thread model: posix
gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) 

Checkout

You can checkout Kernel source tree from tobetter's Github. Please note that we distribute the Linux kernel in different branches for Android and other Linux distributions.

$ git clone --depth 1 https://github.com/tobetter/linux -b odroidxu4-v4.2
$ cd linux

Compile

Before compiling, you must configure for ODROID-XU4 with following command.

$ make odroidxu4_defconfig
$ make

Then you can start to build Linux kernel image, zImage. This will create arch/arm/boot/zImage. You can also add -j option for fast compile.

Installation

This explanation assume that your USB memory CARD reader is assigned at /dev/sdc. Be careful!

1. Plug the Boot-Device(eMMC or SD) into the USB memory CARD reader and Connect the USB memory CARD reader to your HOST PC(Linux OS).

2. Copy the zImage and DT(exynos5422-odroidxu4.dtb) to the FAT partition(1st partition) in the Boot-Device.

$ mkdir -p mount
$ sudo mount /dev/sdc1 mount/
$ sudo cp arch/arm/boot/zImage mount/
$ sudo cp arch/arm/boot/dts/exynos5422-odroidxu4.dtb mount/
$ sync
$ sudo umount mount/

3. Copy the driver modules to the EXT4 partition(2nd partition) in the Boot-Device.

$ sudo mount /dev/sdc2 mount/
$ sudo make modules_install ARCH=arm INSTALL_MOD_PATH=mount/
$ sync
$ sudo umount mount/
en/xu4_building_kernel.txt · Last modified: 2015/09/21 11:19 by tobetter
CC Attribution-Share Alike 3.0 Unported
Driven by DokuWiki Recent changes RSS feed Valid CSS Valid XHTML 1.0