Differences

This shows you the differences between two versions of the page.

--- en:usb_uart_kit [2015/12/01 18:59]
odroid [UART Console Connector]
+++ en:usb_uart_kit [2016/12/18 11:01] (current)
odroid [UART Console Connector]
@@ Line 82: / Line 82: @@
 .8V LVTTL for ODROID-U3/XU3/XU4/X2/X
-.3V LVTTL for ODROID-C1/W
+.3V LVTTL for ODROID-C1/C1+/C0/C2/W
+RxD pin is input and TxD pin is output.
+The VCC pin is not a power source but a reference voltage input.
+It is used for detecting the IO voltage like a VIO or a VDDIO.
+Support for I/O interface voltages down to 1.8 V is provided via a VIO pin.
 </code>
+**Molex 5268-04a(2.5mm pitch) is mounted on the PCB. \\
+Its mate is Molex 50-37-5043 Wire-to-Board Crimp Housing.\\
+degreed corner edge is a mark for pin number 1.**
+====== USB UART Schematic ======
+{{:en:others:usb_uart_for_odroid.png?1024|}}