We're no longer updating This wiki!!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
en:c2_hifi_shield [2016/05/19 15:26]
odroid
en:c2_hifi_shield [2016/12/11 10:07] (current)
odroid [HiFi-shield2]
Line 1: Line 1:
-**Quick installation guide to enable the HiFi Shield ​audio output on Ubuntu.**+=====Quick installation guide to enable the I2S audio output on Ubuntu.===== 
 +==== HiFi-shield & HiFi-Shield+ ==== 
 +{{http://​www.hardkernel.com/​main/​_Files/​prdt/​2016/​201605/​201605181634077377.jpg?​400|}} 
 + 
 +The HiFi Shield Plus provides both stereo RCA connectors and a 3.5mm stereo jack (all gold-plated) to connect to external amplifiers and other audio equipment. An S/PDIF Optical output is also available. ​ Via TI's high-end ​**PCM5102** DAC chip(known as Burr-Brown),​ it supports 16, 24, 32 bit audio formats with minimal distortion (-93dB) and ideal dynamics (110dB+), plus amazing sampling rates of 384kHz
  
   - Assemble the C2 with the HiFi shield, attach a USB keyboard, USB mouse and HDMI monitor, then power up the system.\\   - Assemble the C2 with the HiFi shield, attach a USB keyboard, USB mouse and HDMI monitor, then power up the system.\\
Line 24: Line 28:
   - To test, connect an amplifier to the 3.5mm or RCA lineout jack on the HiFi Shield, and then run:\\   - To test, connect an amplifier to the 3.5mm or RCA lineout jack on the HiFi Shield, and then run:\\
   - Applications -> Sound & Video -> Sound -> Hardware Tab & Output Tab select "​ODROID-DAC"​\\   - Applications -> Sound & Video -> Sound -> Hardware Tab & Output Tab select "​ODROID-DAC"​\\
-  - ** If you want to use the optical ​output, select "​ODROID-HDMI" ​**.\\+  - If you want to use the **Optical ​output** on HiFi-Shile-Plus model, select "​ODROID-HDMI"​.\\
  
-**If you have to load the driver every time whenever your ODROID-C2 starts, simply you can register the driver into /​etc/​modules **\\ <​code>​+**If you have to load the driver every time whenever your ODROID-C2 starts, simply you can register the driver into /​etc/​modules **\\ 
 +<​code>​
 odroid@odroid64:​~$ su odroid@odroid64:​~$ su
 Password: ​ /* root password is "​odroid"​ */ Password: ​ /* root password is "​odroid"​ */
Line 34: Line 39:
 exit exit
 odroid@odroid64:​~$ </​code>​ odroid@odroid64:​~$ </​code>​
-This adds one line at end of the file, /​etc/​modules,​ and load the driver on boot automatically.+This adds one line at end of the file, /​etc/​modules,​ and load the driver on boot automatically.\\ 
 + 
 +**Create /​etc/​asound.conf with the following content:​** 
 +<​code>​ 
 +pcm.!default ​ { 
 + type hw card 1 
 +
 +ctl.!default { 
 + type hw card 1 
 +
 +</​code>​ 
 +Reboot again. \\ 
 + 
 +**Check, if the sound card is enabled with “aplay -l”:** 
 +<​code>​ 
 +odroid@odroid64:​~$ aplay -l 
 +**** List of PLAYBACK Hardware Devices **** 
 +card 0: ODROIDHDMI [ODROID-HDMI],​ device 0: I2S.27 dit-hifi-0 [] 
 +  Subdevices: 1/1 
 +  Subdevice #0: subdevice #0 
 +card 1: ODROIDDAC [ODROID-DAC],​ device 0: I2S.27 pcm5102-0 [] 
 +  Subdevices: 1/1 
 +  Subdevice #0: subdevice #0 
 +odroid@odroid64:​~$ 
 +</​code>​ 
 + 
 +==== HiFi-shield2 ==== 
 +{{http://​www.hardkernel.com/​main/​_Files/​prdt/​2016/​201610/​201610081156405325.jpg?​800|}} 
 + 
 +The HiFi Shield 2 provides stereo RCA connectors to connect to external amplifiers and other audio equipment. An S/PDIF Optical output is also available. 
 +Via TI's high-end **PCM5242** DAC chip(known as Burr-Brown),​ it supports 16, 24, 32 bit audio formats with minimal THD+N ratio (0.002%) and ideal dynamics (116dB+), plus amazing sampling rates of 384kHz. Volume control via I2C interface is great feature to keep the great audio quality with various audio output volume. 
 + 
 +  - Assemble the C2 with the HiFi shield2, attach a USB keyboard, USB mouse and HDMI monitor, then power up the system.\\ 
 +  - Update the System: **sudo apt-get update && sudo apt-get dist-upgrade** \\ 
 +  - To ensure that the HiFi shield2 kernel modules are loaded on Terminal.\\ <​code>​ 
 +odroid@odroid64:​~$ aplay -l 
 +**** List of PLAYBACK Hardware Devices **** 
 +card 0: ODROIDHDMI [ODROID-HDMI],​ device 0: I2S dit-hifi-0 [] 
 +  Subdevices: 1/1 
 +  Subdevice #0: subdevice #0 
 +odroid@odroid64:​~$ su 
 +Password: ​ /* root password is "​odroid"​ */ 
 +root@odroid64:/​home/​odroid#​ modprobe aml_i2c 
 +root@odroid64:/​home/​odroid#​ modprobe snd_soc_pcm512x 
 +root@odroid64:/​home/​odroid#​ modprobe snd_soc_pcm512x_i2c 
 +root@odroid64:/​home/​odroid#​ echo pcm5242 0x4c > /​sys/​class/​i2c-adapter/​i2c-1/​new_device 
 +root@odroid64:/​home/​odroid#​ modprobe snd-soc-odroid-dac2 
 +root@odroid64:/​home/​odroid#​ aplay -l 
 +**** List of PLAYBACK Hardware Devices *** 
 +card 0: ODROIDHDMI [ODROID-HDMI],​ device 0: I2S dit-hifi-0 [] 
 +  Subdevices: 1/1 
 +  Subdevice #0: subdevice #0 
 +card 1: ODROIDDAC2 [ODROID-DAC2],​ device 0: I2S pcm512x-hifi-0 [] 
 +  Subdevices: 0/1 
 +  Subdevice #0: subdevice #0 
 +root@odroid64:/​home/​odroid#​ 
 +</​code>​ 
 +  - To test, connect an amplifier to the RCA out jack on the HiFi Shield2, and then run:\\ 
 +  - Applications -> Sound & Video -> Sound -> Hardware Tab & Output Tab select "​ODROID-DAC2"​\\ 
 +  - If you want to use the **Optical output** select "​ODROID-HDMI"​.\\ 
 + 
 +**You want to add the HiFi-Shield2 sound_card on ODROID-C2 at boot by editing /​etc/​rc.local. **\\ 
 +<​code>​ 
 +odroid@odroid64:​~$ sudo nano /​etc/​rc.local 
 +if [ -f /​aafirstboot ]; then /​aafirstboot start ; fi 
 + 
 +echo Loading HiFi-Shield2 module 
 +modprobe aml_i2c 
 +modprobe snd-soc-pcm512x 
 +modprobe snd-soc-pcm512x-i2c 
 +echo pcm5242 0x4c > /​sys/​class/​i2c-adapter/​i2c-1/​new_device 
 +modprobe snd-soc-odroid-dac2 
 + 
 +amixer -c 1 sset Analogue 0 
 +amixer -c 1 sset Digital 201 
 +amixer -c 1 sset Deemphasis on 
 +echo Done. 
 + 
 +exit 0 
 + 
 +^G Get Help  ^O Write Out ^W Where Is  ^K Cut Text  ^J Justify ​  ^C Cur Pos 
 +^X Exit      ^R Read File ^\ Replace ​  ^U Uncut Text^T To Linter ^_ Go To Line  
 +</​code>​ 
 +Add the following at the bottom of the page above exit 0. ^x exit and save the file. Reboot your ODROID-C2.\\ 
 + 
 +**Create /​etc/​asound.conf with the following content:​** 
 +<​code>​ 
 +pcm.!default ​ { 
 + type hw card 1 
 +
 +ctl.!default { 
 + type hw card 1 
 +
 +</​code>​ 
 +Reboot again. \\ 
 + 
 +**Check, if the sound card is enabled with “aplay -l”:** 
 +<​code>​ 
 +odroid@odroid64:​~$ aplay -l 
 +**** List of PLAYBACK Hardware Devices **** 
 +card 0: ODROIDHDMI [ODROID-HDMI],​ device 0: I2S dit-hifi-0 [] 
 +  Subdevices: 1/1 
 +  Subdevice #0: subdevice #0 
 +card 1: ODROIDDAC2 [ODROID-DAC2],​ device 0: I2S pcm512x-hifi-0 [] 
 +  Subdevices: 1/1 
 +  Subdevice #0: subdevice #0 
 +odroid@odroid64:​~$ </​code>​
  
 +<WRAP center round important 60%>
 +If above guide is not comfortable for you, try this alternative easy solution made by Fourdee (DietPi OS image author).\\
 +http://​forum.odroid.com/​viewtopic.php?​f=118&​t=24415
 +</​WRAP>​
en/c2_hifi_shield.1463640986.txt.gz · Last modified: 2016/05/19 15:26 by odroid
CC Attribution-Share Alike 3.0 Unported
Driven by DokuWiki Recent changes RSS feed Valid CSS Valid XHTML 1.0