Search
You can find the results of your search below.
Results
Matching pagenames:
- xu4_cloudshell (en)
- xu4_cloudshell-2_quicksetup
- xu4_cloudshell2 (en)
- xu4_cloudshell2_raid_setting
- xu4_cloudshell_ir_config
- xu4_cloudshell_lcd_backlight
- xu4_cloudshell_lcd_config
- xu4_cloudshell_lcd_server
- xu4_cloudshell_lcd_xorg
- xu4_cloudshell_omv (en)
- xu4_cloudshell_quicksetup
- xu4_cloudshell_smartmontools
- assembling_cs2 (en:xu…dshell2)
- easy_install (en:xu4…udshell2)
- performance (en:xu4…udshell2)
- software_settings (en:…hell2)
- en:xu4_cloudshell2: 29 Hits
- /main/products/prdt_info.php?g_code=G149142327280|CloudShell2]] for the **ODROID-XU4** is an affordable DIY Ne... /main/products/prdt_info.php?g_code=G143599699669|CloudShell]], it includes a color LCD and IR receiver on the... 2327280|Where to buy]] <WRAP left round tip 80%> CloudShell2 must run Kernel 4.9 based image to utilize the U... ower Input ===== Improvements over the original CloudShell (UAS and RAID) ===== One of the key features of C
- en:xu4_cloudshell2:software_settings: 25 Hits
- ====== Software Setting Guide for CloudShell-2 ====== This is step-by-step guide based on [[http://odroid.com/... nux_ubuntu_k49|Ubuntu 16.04.2 minimal image]] for CloudShell-2 software environment. **0. Download Ubuntu ima... ODROID-XU4.** [On ODROID-XU4] **4. Power on the CloudShell-2.** **4.2 Power off and on again the CloudShell-2** when the booting process is finished. **5. Login 'root
- en:xu4_cloudshell: 19 Hits
- ====== Cloudshell ====== {{http://dn.odroid.com/homebackup/XU4CloudShellm.jpg?500|}} ===== Hardware specification ===== * [[http://dn.odroid.com/cloudshell/cloudshell_rev0.2.pdf|XU4 Cloud Shell Rev0.2 Schematic]] * [[http://dn.odroid.com/cloudshell/cloudshell_rev0.3.pdf|XU4 Cloud Shell Rev0.3 Sche
- en:xu4_cloudshell2:easy_install: 8 Hits
- ?600|}} There are four data storage modes on the CloudShell2: **//RAID 0, RAID 1, SPAN//** and **//PM//**. ... the LCD wget https://github.com/john1117/odroid-cloudshell/raw/master/odroid-cloudshell_20170420-4_armhf.deb sudo dpkg -i odroid-cloudshell_20170420-4_armhf.deb Fan configuration wget https://
- en:xu4_cloudshell_lcd_server: 7 Hits
- rmation on LCD ====== [[https://github.com/mdrjr/cloudshell_lcd|Project Github]] == Requirements == * Test... ake sure you have it configured already: [[en:xu4_cloudshell_lcd_config|Cloudshell LCD Configuration]] == Installation == <code> sudo apt-get install curl sysstat wget https://raw.githubusercontent.com/mdrjr/cloudshell_lcd/master/cloudshell-lcd_20160913-3_armhf.deb su
- en:xu4_cloudshell_quicksetup: 6 Hits
- able the LCD and IR receiver included with ODROID CloudShell. ===== Installation ===== The first thing is to a... the repository to download the package, **odroid-cloudshell**, so further update will be continued if necessa... can install the package by **apt-get**. **odroid-cloudshell** package is also to install more packages necess... ode> root@odroid-server:~# apt-get install odroid-cloudshell Reading package lists... Done Building dependency
- en:xu4_cloudshell_ir_config: 6 Hits
- ====== Configuring the IR Sensor on Cloudshell ====== ===== Setup ===== Use the automated tool to configure it. ([[https://github.com/mdrjr/cloudshell_ir|Github Project page]]) <code>wget https://raw.githubusercontent.com/mdrjr/cloudshell_ir/master/install_ir.sh chmod +x install_ir.sh su... r own remote controller ===== By default **ODROID CloudShell** package installs and configures the remote for
- en:xu4_cloudshell2:assembling_cs2: 6 Hits
- B + P)|{{:en:acc:cs2:asm1.jpg?200 |}}|Attach the Cloudshell-2 board\\ to the hard disks.(K)| ^ 3. ^^ 4. ^^ |{{:en:acc:cs2:asm2.jpg?200 |}}|Screw CloudShell-2 board\\ to left/right pieces. (O)|{{:en:acc:cs2... s2:asm4.jpg?200 |}}|Insert the FAN cable\\ to the CloudShell-2 board.|{{:en:acc:cs2:fan_quiet.png?200|}}|__**I... PCB between \\ the FAN cable connector and \\ the Cloudshell-2 board.**__| ^ 7. ^^ 8. ^^ |{{:en:acc:cs2:as
- en:xu4_release_debian_mainline: 5 Hits
- t update # apt-get dist-upgrade </code> ===== For CloudShell ===== These platform images does not contain the packages for CloudShell hardwares like LCD or IR receiver, instead you ca... <code> # apt-get update # apt-get install odroid-cloudshell # reboot </code> These commands will install the necessary files for CloudShell and next reboot will give you Linux shell on LCD
- en:xu4_cloudshell-2_quicksetup: 4 Hits
- e LCD and Fan on/off service included with ODROID CloudShell-2. ===== Installation ===== <code> wget https://github.com/john1117/odroid-cloudshell-2/raw/master/cloudshell-2-lcd_20170414-3_armhf.deb sudo dpkg -i cloudshell-2-lcd_20170414-3_armhf.deb sudo apt-get install -f sudo re
- en:xu4_cloudshell_lcd_config: 3 Hits
- ====== Cloudshell LCD Configuration ====== Cloudshell features a 2.2" TFT LCD with a 320x240 resolution. The display is contro... 340 busnum=1 rotate=270" > /etc/modprobe.d/odroid-cloudshell.conf echo "spi_s3c64xx" >> /etc/modules echo "spi
- en:xu4_cloudshell_smartmontools: 2 Hits
- ====== Cloudshell Smartmontools ====== Cloudshell USB 3.0 to SATA3 uses a Genesys Logic chip that is not supported on Ubuntu 1
- en:odroid-xu4: 2 Hits
- the 3.5inch TFT+Touchscreen Shield]] * [[en:xu4_cloudshell|CloudShell]] * [[en:xu4_cloudshell2|CloudShell2]] * [[en:gpiomem|Rootless GPIO access: /dev/gpiomem]] ==== Android ==== * [[c2_app_launch_vi
- en:xu4_cloudshell2:performance: 1 Hits
- ====== Overview ====== This wiki page shows cloudshell2 performance. RAID0, RAID1, SPAN, and PM mode separately thereby set the mode switch on the cloudshell2 board and added a test condition installed soft... /main/products/prdt_info.php?g_code=G149142327280|CloudShell2]] * 3.5" 4TB WD Red NAS HDD x 2 ** Software **... y [[http://odroid.com/dokuwiki/doku.php?id=en:xu4_cloudshell2:software_settings|here]] ====== Test Result ===
- en:xu4_cloudshell2_raid_setting: 1 Hits
- en:xu4_cloudshell_omv: 1 Hits