Table of Contents

Overview

This wiki page shows cloudshell2 performance.

RAID0, RAID1, SPAN, and PM mode separately thereby set the mode switch on the cloudshell2 board and added a test condition installed software RAID mdadm in the JBOD(PM) to compare with hardware RAID and software RAID.

Test environment

Hardware

Software

Test Result

Watch this result out, HELIOS LanTest shows RAID 0 mode is the similar performance with RAID 0 of HW or SW. However,
In general, the result shows that hardware RAID is about more than 10% faster than software RAID mdadm.

HW RAID 0

root@odroid:/media/hdd# dd if=./urandom.test of=/dev/null iflag=direct bs=8M
384+0 records in
384+0 records out
3221225472 bytes (3.2 GB, 3.0 GiB) copied, 17.889 s, 180 MB/s

HW RAID 1

root@odroid:/media/hdd# dd if=./urandom.test of=/dev/null iflag=direct bs=8M
384+0 records in
384+0 records out
3221225472 bytes (3.2 GB, 3.0 GiB) copied, 21.7006 s, 148 MB/s

HW SPAN

root@odroid:/media/hdd# dd if=./urandom.test of=/dev/null iflag=direct bs=8M
384+0 records in
384+0 records out
3221225472 bytes (3.2 GB, 3.0 GiB) copied, 20.1366 s, 160 MB/s

HW PM

root@odroid:/media/hdd2# dd if=./urandom.test of=/dev/null iflag=direct bs=8M
384+0 records in
384+0 records out
3221225472 bytes (3.2 GB, 3.0 GiB) copied, 17.8035 s, 181 MB/s

HW PM and SW RAID 0 ( mdadm )

root@odroid:/media/hdd# dd if=./urandom.test of=/dev/null iflag=direct bs=8M
384+0 records in
384+0 records out
3221225472 bytes (3.2 GB, 3.0 GiB) copied, 23.8105 s, 135 MB/s

HW PM and SW RAID 1 ( mdadm )

root@odroid:/media/hdd# dd if=./urandom.test of=/dev/null iflag=direct bs=8M
384+0 records in
384+0 records out
3221225472 bytes (3.2 GB, 3.0 GiB) copied, 48.9907 s, 65.8 MB/s

READ TEST ( JBOD(PM) under the Windows 10 via Samba )

WRITE TEST ( JBOD(PM) under the Windows 10 via Samba )

CloudShell 2 and LVM2

Additional performance test with LVM2 for easier storage upgrade in the future by crazyquark at https://forum.odroid.com/viewtopic.php?f=147&t=27679
Thank you crazyquark