ODROIDC2-UBOOT-CONFIG

setenv dtbaddr 0x1000000
setenv loadaddr 0x20000000

setenv hdmimode "720p60hz"

setenv rootopt "root=/dev/mmcblk0p2 rw init=/init rootwait"
setenv consoleopt "console=ttyS0,115200"
setenv androidopt "androidboot.hardware=odroidc2 androidboot.serialno=${fbt_id#}"
setenv logoopt "osd1,loaded,${fb_addr},${hdmimode}"
setenv selinuxopt "androidboot.selinux=disabled"

# HDMI/DVI Mode Configuration
# This will enforce the signal type of display
# "hdmi" - For HDMI interface
# "dvi" - For DVI interface
setenv vout_mode "hdmi"

# Overscan offset configuration
# All offsets are zero and can be tuned by manual or ODROID Utility
setenv overscan_top "0"
setenv overscan_left "0"
setenv overscan_bottom "0"
setenv overscan_right "0"

setenv bootargs "${rootopt} ${consoleopt} hdmimode=${hdmimode} hdmitx=${cecconfig} vout=${vout_mode} logo=${logoopt} ${androidopt} ${selinuxopt}"
save

showlogo ${hdmimode}

movi read dtb 0 ${dtbaddr}
movi read boot 0 ${loadaddr}
booti ${loadaddr} - ${dtbaddr}